The 1- through 15-ton Stub Axle Wheel Assembly includes the following:
- 1 – Wheel
- 2 – Axle boxes-high-grade cast iron
- 1 – Wheel set of tapered roller bearings including dust collars
- 1 – Axle C1045 hot rolled steel with lube fitting
Wheel diameters 10″ thru 20″ are available.
| Capacity | Shaft Dia. A | Shaft Dia. B | Shaft Dia. C | D | E | F | G | H | I | J |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 ton | 1-5/8″ | 1-3/8″ | 1-1/8″ | 8-3/4 | 10 | 5-1/8 | 1-3/4 | 3-5/8 | 3 | 7 |
| 3 ton | 2-1/4″ | 2″ | 1-3/4″ | 13 | 14 | 6-3/4 | 2-1/2 | 6-1/4 | 4-1/4 | 9-5/8 |
| 5 ton | 2-3/4″ | 2-1/2″ | 2-1/4″ | 13 | 14 | 6-3/4 | 2-1/2 | 6-1/4 | 4-1/4 | 9-5/8 |
| 8 ton | 3″ | 2-3/4″ | 2-1/2″ | 13 | 14 | 6-3/4 | 2-1/2 | 6-1/4 | 4-1/4 | 9-5/8 |
| 10 ton | 3-1/4″ | 3″ | 2-3/4″ | 14-3/4 | 14 | 7-5/8 | 3 | 7-1/8 | 5-7/8 | 10 |
| 12 ton | 3-1/4″ | 3″ | 2-3/4″ | 14-3/4 | 14 | 7-5/8 | 3 | 7-1/8 | 5-7/8 | 10 |
| 15 ton | 3-3/4″ | 3-1/2″ | 3-1/4″ | 14-3/4 | 14 | 7-5/8 | 3 | 7-1/8 | 5-7/8 | 10 |
| Capacity | K | L | M | N | O | P | Q | R | Approx. WT. |
|---|---|---|---|---|---|---|---|---|---|
| 1 ton | 2 | 1-3/4 | 1/2 | 3/4 | 8 | 6 | 3 | 1 | 190 lbs. |
| 3 ton | 2-5/8 | 2-1/4 | 3/4 | 1-1/8 | 9-3/4 | 7-1/2 | 3-3/4 | 1-1/8 | 210 lbs. |
| 5 ton | 2-5/8 | 2-1/4 | 3/4 | 1-1/8 | 9-3/4 | 7-1/2 | 3-3/4 | 1-1/8 | 225 lbs. |
| 8 ton | 2-5/8 | 2-1/4 | 3/4 | 1-1/8 | 9-3/4 | 7-1/2 | 3-3/4 | 1-1/8 | 235 lbs. |
| 10 ton | 3 | 3-1/2 | 3/4 | 1-3/8 | 15 | 11 | 5-1/2 | 2 | 350 lbs. |
| 12 ton | 3 | 3-1/2 | 3/4 | 1-3/8 | 15 | 11 | 5-1/2 | 2 | 360 lbs. |
| 15 ton | 3 | 3-1/2 | 3/4 | 1-3/8 | 15 | 11 | 5-1/2 | 2 | 390 lbs. |
Model No. SA-102
The 25- and 40-ton Stub Axle Wheel Assembly includes the following:
- 1 – 18″ or 22″ diameter wrought steel wheel-heat treated
- 2 – Axle boxes-high-grade cast iron on the 25 ton and cast steel on the 40 ton
- 1 – “AP” tapered roller bearing
- 1 – Axle C1045 cold rolled steel
- 2 – End caps with hardware
- Load ratings are based on 15 RPM. RPM’s greater than 15 are available
- Operating temperature 300°F maximum
- Units are completely assembled, painted, permanently lubricated and ready for installation
| Capacity | A | B | C | D | E | F | G | H |
|---|---|---|---|---|---|---|---|---|
| 25 ton | 15 | 5-1/2 | 1-3/8 | 1-3/4 | 13-3/4 | 5 | 1-5/32 | 3-27/32 |
| 40 ton | 17 | 6-1/2 | 2 | 2 | 16-1/2 | 5 | 1-5/32 | 3-27/32 |
| Capacity | I | J | K | L | M | N | O | P | WT. |
|---|---|---|---|---|---|---|---|---|---|
| 25 ton | 6 | 4 | 18 or 22 | 7-1/8 | 13/32 | 6-5/8 | 4 | 3/4 | 670 |
| 40 ton | 7 | 5 | 8-1/4 | 13/32 | 8-1/4 | 5-3/16 | 1 | 800 |